Paver systems in California are incredibly vulnerable to the sun. In time, un-sealed pavers begin to look worn, faded and dull. Properly installed paver sealing will renew the surface color and provide a protective barrier from the sun and its damaging effects.

STAIN PREVENTION. Most pavers today are made of concrete, which is by its very nature a semi-porous material, susceptible to all kinds of staining and marking. Oil, grease and rust are very difficult to remove from unsealed pavers because they are so easily absorbed. Paver sealing prevents the absorption of these stains, as well as retarding the growth of algae, mold, mildew and weeds making ongoing maintenance of a properly sealed paver surface much easier and far more effective.

STRUCTURAL INTEGRITY. Most brick pavers use a joint sand system to keep the pavers in place, and space one from the next. An integral part of our paver sealing process is thoroughly re-sanding these joints prior to the application of sealant. Additionally, paver sealing effectively reduces the effects of erosion on the pavers, preventing the exposure of the structural aggregate.

APPEARANCE. Aesthetically, there is no question that a properly sealed brick paver surface looks better than its un-sealed counterpart. Our clients will notice a substantial deepening of the stones natural color, as well as a crisp elegant look that can be completed in your choice of finishes. Natural, Enhanced or Wet Look.

NATURAL, finish Creates a slight satin finish that does not significantly change the colors of the paver.

• Slight Change
• Does not show wear
• Almost no maintenance
• Stabilizes Joint Sand
• Protects Surface

FEATURES AND BENEFITS

Breathable - Will not trap efflorescence and whiten
Dual-purpose - Sealer and joint sand stabilizer
Durable chemical sand bond - Reduces weeds and insects
Eco-friendly - Solvent free, will not kill plants or damage building materials

SealTechPro's Joint NATURAL Stabilizing Sealer is designed specifically for use on block paving to stabilize joint sand and seal the paver surface. It is a water-based single component polymer that penetrates into the pores and seals the surface with a coating that gives you a natural looking satin sheen. Joint Stabilizing Sealer is a green product that is solvent free and environmentally friendly. It is VOC, EPA, OSHA and FDA compliant. It is non-hazardous and non-toxic and has the consistency of water. It is milky white with a slight odor when in its liquid state and dries clear. It can be used indoors and outdoors because it is safe and UV stable, on both new and existing projects. Joint Stabilizing Sealer can be applied immediately after pavement completion because it will not trap efflorescence and whiten.

ENHANCED, finish Provides a semi-gloss finish that enhances the surface colors and brings out the best color possible.

• Attractive medium enhancement
• Protects against staining
• Low maintenance
• Seals surface
• Stabilizes Joint Sand

FEATURES AND BENEFITS

Breathable - Will not trap efflorescence and whiten
Dual-purpose - Sealer and joint sand stabilizer
Durable surface seal - Increased protection and stain resistance
Eco-friendly - Solvent free, will not kill plants or damage building materials

SealTechPro's ENHANCING Stabilizing Sealer is designed specifically for use on block paving to stabilize joint sand and seal the paver surface. It is a water-based single component polymer that penetrates into the pores and seals the surface with a coating that gives you a semi-gloss finish. Enhancing Stabilizing Sealer is a green product that is solvent free and environmentally friendly. It is VOC, EPA, OSHA and FDA compliant. It is non-hazardous and non-toxic and has the consistency of water and a milky white appearance with a slight odor when in it’s liquid state and dries to clear semi-gloss finish. It can be used indoors and outdoors on new and existing projects because it is safe and UV stable. Enhancing Stabilizing Sealer can be applied immediately after pavement completion because it will not trap efflorescence and whiten and it has good coverage. The product is easy to install and offers increased stain protection and reduces the formation of efflorescence. Cured product is heat and freeze resistant.

WET LOOK, finish is a popular finish with most customers.  It enrinches and darkens your pavement with a range of finishes between flat and semi-gloss.

• Significant color enhancement
• Great Look
• Good Stain Resistance
• Seals Surface
• Stabilizes Joint Sand

FEATURES AND BENEFITS

Deep penetration - Durable protective seal
Easy-to-clean - Helps keep the pavement stain free
Water resistant barrier - Resists freeze thaw and other damage
Easy to apply - Safe to use

SealTechPro's WETLOOK SB is designed specifically for use on block paving to seal the paver surface. It is a solvent-based single component polymer that seals the surface to gives you a semi-gloss finish. Read all the instruction completely to ensure the application is carried out correctly. It has the consistency of water and is clear appearance and has a medium odor when in it’s liquid state and dries to semi-gloss enhanced finish. It can be used indoors outdoors on new existing projects because it is UV stable. WetLook SB can be applied immediately and it has outstanding coverage. The product is easy to install and offers great stain and environment protection. Cured product is heat and freeze resistant.